Liquid Coolers
Thermoelectric Cooling Assembly Instruction Manual [680 KB]Model LC-035  Capacity Rating: 35 watts at a 0 °C temperature difference Example Applications: In-process fluid cooling and gas drying in analytical instruments. Features: This cooler is best suited for small heat loads. Like all of our coolers, it can be easily customized to meet your production requirements: special liquid plates, smaller heat sinks, different operating voltages, lower power consumption, etcetera. Powered by 12VDC, it has the lowest power consumption of any of our standard liquid coolers, which makes it compatible with all of our temperature controllers. |  |
| Model LC-061 Capacity Rating: 61 watts at a 0 °C temperature difference Example Applications: Recirculating water chillers, cooling in-process fluid, and gas drying in analytical instruments. Features: A four-pass liquid loop provides a very good thermal link between the fluid and the two thermoelectric modules. The aluminum portions of the liquid path are hard-coat anodized to prevent corrosion. For stainless steel liquid paths select a cold-plate style cooler and add an optional stainless steel liquid plate. This cooler is powered by 24 VDC and is compatible with the TC-24-10, TC-24-12, and the TC-24-25 series temperature controllers. |  |
| Model LC-200 Capacity Rating: 200 watts at a 0 °C temperature difference Example Applications: Laboratory instruments, laser diode cooling, medical products, recirculating chillers, temperature baths. Features: High-density bonded-fin heat sink, an eight-pass liquid loop, and six thermoelectric modules for high capacity in a compact size. As with all of our liquid coolers it can be customized with swirl inserts in the liquid loop to improve efficiency at low flow rates. This cooler is powered by 24 VDC and is compatible with the TC-24-25 series temperature controllers. |  |