The MP-2986 display and keypad is a optional accessory used on the TC-36-25- RS232 or the TC-36-25-RS485 controller. It provides a convenient way of showing and adjusting the temperature set point or showing the actual temperature being sensed when the TC-36-25-RS232/TC-36-25-RS485 is operating as a stand-alone controller.
Three buttons are located on the circuit board. One toggles the display between the actual temperature and the set temperature. The other two buttons are used to adjust the set temperature up or down when the set temperature is being displayed.
SPECIFICATIONS
4-digit display allows user to read both the actual and the set temperature
Set temperature can be adjusted up or down
0.01 °C Resolution
83 mm x 56 mm footprint
45 cm cable length
Manual is included on CD ROM
Power is supplied by the TC-36-25-RS232/TC-36-25-RS485 controller
3D PDF MODEL:Click on the link above to download a 3D model.You can rotate and view the cooler from any angle to better understand the physical properties ofthe product. (However, wire leads are not shown in the model.)This is a portable document format (.pdf) file, Adobe Reader 8 or higher is all that is required for viewing.You may be prompted by Adobe Reader to do a one-time upgrade to Version 8.0 or for 3D model support components.3D content may initially appear as a two-dimensional preview image. Clicking the 3D model with the Hand or Select tool enables (or activates) the model and opens the 3D toolbar.
Show Cart
