Power supply is pictured without the included power cord attached. One North-American standard power cord is supplied attached to the power supply. When ordered in conjunction TE Technology coolers and/or temperature controllers interconnection cables are included free of charge. Power cords for the UK, EU, and Italy can be purchased separately. RoHS compliant. Input Voltage: 88-264 VAC , 47-63 Hz Input Voltage Range Selection: No selection required, continuous within range. Power Factor Correction: Yes Output Voltage: 48 V DC Output Voltage Adjustment: +/- 10% via adjustable trimpot / potentiometer Maximum Output Current: 10 A Over-Current Protection: Yes, ,105~135% rated output power, automatic recovery. Dimensions: 185x120x93 mm Cooling: Fan cooled, fan speed regulated via internal temperature sensor Maximum ambient is 50 degrees Celsius. For ambient temperatures above 40 degrees Celsius, derate output current by 4% per degree Celsius (60% at 50 degrees Celsius). For operation below 240VAC, derate by 0.084% per volt. Notes: This power supply features output enable connections on the terminal strip. The output is “on” when the included jumper/short is in place. If the jumper/short is removed the output is “off”. This is a low-voltage, low-current signal that can be used to disable the power supply if the jumper is replaced with a switch or thermostat. Thermostat should be used only as an over-temperature / under-temperature safety switch and not as a regular means of temperature control.
Details
|
Show Cart
