Cold plates are usually the best choice of thermoelectric cooling method when the object to be cooled can be attached directly to the cold plate.
The direct contact between the object and the cold plate allows the heat to be efficiently conducted to the thermoelectric (Peltier) modules.
This, in turn, keeps the system operating as efficiently as possible and improves the stability and accuracy of temperature control.
Capacity Rating: 31 watts at a 0°C temperature difference. Example Applications: Small laser diodes and laboratory instruments. Features: This cold plate provides effective direct contact cooling in our lowest cost standard assembly. The lack of an extender block between the module and cold plate helps make this our smallest cold plate. The cooler is best suited for small heat loads where a large temperature difference is not needed. Powered by 12VDC, it has the lowest power consumption of any of our standard cold plates, which makes it compatible with all of our temperature controllers.
Product Details...
Capacity Rating: 36 watts at a 0°C temperature difference. Example Applications: Medical and laboratory instruments. Features: Provides good cooling for small heat loads at low temperatures. This is made possible by using a large heat sink for only one thermoelectric module and an extender block that allows extra insulation between the heat sink and cold plate. Powered by 12VDC, its low power consumption makes it compatible with all of our temperature controllers.
Product Details...
Capacity Rating: 63 watts at a 0 °C temperature difference. Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes. Features: Two-module cold plate increases the heat-pumping capacity for cooling medium sized heat loads. Heat-sink air travels through the length of the fins (in one end, out the other) giving users a different option for locating the air inlet and outlet within their system. This cooler is powered by 24 VDC and is compatible with the TC-24-10, TC-36-25 RS232, and TC-48-20 series temperature controllers.
Product Details...
Capacity Rating: 65 watts at a 0°C temperature difference. Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes. Features: Another two-module cooling system with the heat sink airflow directed in a more typical configuration (in the middle and out both ends). Like all of our coolers, it can be easily customized to meet your production requirements: special cold plates, smaller heat sinks, different operating voltages, lower power consumption, et cetera. This cooler is powered by 24 VDC and is compatible with the TC-24-10, TC-36-25 RS232, and TC-48-20 series temperature controllers.
Product Details...
Capacity Rating: 110 watts at a 0°C temperature difference. Example Applications: Laboratory instruments, laser diodes, medical products, and cooling corrosive liquids with an optional stainless-steel liquid exchanger. Features: This cold plate uses two large thermoelectric modules for cooling medium sized heat loads. The high efficiency bonded-fin heat sink keeps the cooler small yet effective. One stainless-steel liquid exchanger can also be attached for cooling of corrosive liquids (please inquire for this option). This cooler is powered by 24 VDC and is compatible with the TC-36-25 RS232 and TC-48-20 series temperature controllers.
Product Details...
Capacity Rating: 121 watts at a 0 °C temperature difference. Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes. Features: Four-module cold plate increases the heat-pumping capacity for cooling medium to large heat loads. Heat-sink air travels through the length of the fins (in one end, out the other) giving users a different option for locating the air inlet and outlet within their system. Can be used with one LC-SSX1 liquid exchanger. This cooler is powered by 24 VDC and is compatible with the TC-36-25 RS232 and TC-48-20 series temperature controllers.
Product Details...
Capacity Rating: 200 watts at a 0°C temperature difference. Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers. Features: Our largest standard cold plate uses six thermoelectric modules, a bonded fin heat sink, and extender blocks for large heat loads or good cooling to low temperatures. Additionally, two stainless steel liquid exchangers can also be attached for cooling of corrosive liquids. Please inquire if you are interested in this option. All versions of this cooler are powered by 24 VDC and are compatible with the TC-36-25 RS232 and TC-48-20 series temperature controllers.
Product Details...
Capacity Rating: 200 watts at a 0°C temperature difference. Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers. Features: A variant of the CP-200, this cooler adds the extra capability of heating up to 100 °C.
Product Details...
Capacity Rating: 200 watts at a 0°C temperature difference. Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers. Features: A table-top version of the CP-200HT, the unit additionally has a shroud that encloses the fan and also has legs which stand off the fan from the table top, allowing air to enter freely into the heat sink.
Product Details...
Capacity Rating: 200 watts at a 0°C temperature difference. Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers. Features: A table-top version of the CP-200, the unit has a shroud that encloses the fan and also has legs to stand off the fan from the table top, allowing air to enter freely into the heat sink.
Product Details...
Show Cart
